Services
Replace an old door.
Replacing an old roller, tilt or sectional door is usually a one-day job once your made-to-measure door arrives. What to expect, and what fits in the space you have.
- Old door removed and taken away
- Opener checked or replaced with it
Signs it’s time
When a repair stops making sense.
Rust through the panel or curtain, springs and cables that keep failing, a door that no longer seals or locks, or an opener straining against a door that has lost its balance. We’ll tell you when replacing the door is better value than another repair.
- Rust or holes in the panel
- Repeated breakdowns
- No longer safe or secure
Old tilt door?
Flex‑A‑Door fits where a tilt door was.
Tilt doors leave little room above the opening. Flex‑A‑Door needs as little as 80 mm, fits behind the opening and won’t blow shut.
About Flex‑A‑DoorCompare
Which kind of door fits?
Your opening decides most of it. We confirm the fit at the free measure.
Swipe sideways to compare all three.
| Opening width | 2.4–6.6 m | Up to 3.2 m | 1.2–3.15 m |
|---|---|---|---|
| Opening height | 1.825–3.44 m | Up to 2.775 m | |
| Space needed above the opening | From 200 mmwith an opener; 320 mm standard | About 400 mm | As little as 80 mmwhen opened by hand; 130 mm with an opener |
| How it opens | Rises straight up, then slides back along the ceiling | Rolls up into a drum above the opening | A roller curtain on a curving track that lies flat near the ceiling, behind the opening |
| Insulation | Six styles | Ask us | Ask us |
| Door warranty | 5 years or 10,000 cycles | ||
| Best for | Most homes, and the widest choice of styles and colours | Smaller openings where a simple, tough door suits | Replacing an old tilt door, especially where there’s little room above the opening |
Sizes from Garador’s published specifications.
Free measure and quote
Replace your door.
We measure the opening and the room around it, show you what fits, and send one GST-inclusive price including removal of the old door.
